Pièces

Aucune pièce nécessaire.

Tool on left - PH000 screwdriver
  • Tool on left - PH000 screwdriver

  • Tool on right - iPod fix-it tool

  • Soldering Iron

Ajouter un commentaire

Locate the 3 black screws on the bottom of the camera and the 2 gray screws on each side of the camera. Remove them with a PH000 screwdriver.
  • Locate the 3 black screws on the bottom of the camera and the 2 gray screws on each side of the camera. Remove them with a PH000 screwdriver.

Ajouter un commentaire

Locate the gray band that you removed the screws from; this holds the two halves of the camera together.  Use an iPod fix-it tool to pry the gray band loose and remove it. Locate the gray band that you removed the screws from; this holds the two halves of the camera together.  Use an iPod fix-it tool to pry the gray band loose and remove it.
  • Locate the gray band that you removed the screws from; this holds the two halves of the camera together. Use an iPod fix-it tool to pry the gray band loose and remove it.

Ajouter un commentaire

Use the iPod fix-it tool to separate the back panel from the camera.
  • Use the iPod fix-it tool to separate the back panel from the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Travis Buck

Membre depuis le 25/09/2012

107 Réputation

2 tutoriels rédigés

Équipe

Ohio State, Team 1-2, Buehl Fall 2012 Membre de l'équipe Ohio State, Team 1-2, Buehl Fall 2012

OSU-BUEHL-F12S1G2

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 3

Total : 609