Introduction
This guide will show you how to remove the cover on a OptiPlex 7020
-
-
Disconnect the computer and all attached devices from their electrical outlets
-
Disconnect any telephone, network, or USB cables from the computer
-
-
-
-
Locate the cover latch at the side of the chassis. Pull the cover latch upward
-
Pull the cover upward to a 45 degree angle and remove it from the system
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
