Réparez vos affaires Communauté Boutique

Optical Bay Enclosure Dual Hard Drive Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Universal Prerequisite for Optical Bay Enclosures #78,79,81

  1. Optical Bay Enclosure Dual Hard Drive Replacement, Dual Hard Drive: étape 1, image 1 de 2 Optical Bay Enclosure Dual Hard Drive Replacement, Dual Hard Drive: étape 1, image 2 de 2

    • Remove the plastic positioner from the optical bay hard drive enclosure by pressing in on one of the clips on either side and lifting it up and out of the enclosure.

    Traduire

  3. Optical Bay Enclosure Dual Hard Drive Replacement: étape 2, image 1 de 3 Optical Bay Enclosure Dual Hard Drive Replacement: étape 2, image 2 de 3 Optical Bay Enclosure Dual Hard Drive Replacement: étape 2, image 3 de 3

    • Make sure that the hard drive connectors are facing down before placing it into the enclosure.

    • Gently place the hard drive into the enclosure's hard drive slot.

    • While firmly holding the enclosure in place with one hand, use your other hand to press the hard drive into the enclosure connectors.

    Traduire

  4. Optical Bay Enclosure Dual Hard Drive Replacement: étape 3, image 1 de 2 Optical Bay Enclosure Dual Hard Drive Replacement: étape 3, image 2 de 2

    • Once the hard drive is snug, reinsert the plastic positioner while holding the hard drive against the bottom of the enclosure.

    • Reconnect any cables you have removed from the original optical drive onto the optical bay enclosure.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 5 autres contributeurs

Brittany McCrigler

Membre depuis le 03/05/12

89 020 Réputation

131 tutoriels rédigés

Badges: 48

+ 45 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

136 membres

17 299 tutoriels rédigés

Un commentaire

Great guide, however I think you overestimated the difficulty of it. The biggest challenge is not stripping any screws and being sure to have all sizes that you may possibly need including some that might not be standard because stripping screws is very possible. Otherwise, nice job

Rob Anthony Dire - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 13

Total : 260