Réparez vos affaires Communauté Boutique

Oral-B White Pro 1000 Motherboard Replacement

Introduction

Motherboard Replacement guide for Oral-B White Pro 1000 rechargeable electric toothbrush due to faulty operation. This guide illustrates the disassembly of the Oral-B White Pro 1000 electric toothbrush. Use caution not to short the positive (+) and negative (-) terminals when handling the battery. This guide also requires the use of a soldering tool which reaches high temperatures. Refer to this helpful guide for some great soldering and desoldering tips.

Ce dont vous avez besoin

  1. Oral-B White Pro 1000 Motherboard Replacement, Motherboard: étape 1, image 1 de 1

    • Remove the brush head by pulling the top away from the base.

    Traduire

  2. Oral-B White Pro 1000 Motherboard Replacement: étape 2, image 1 de 3 Oral-B White Pro 1000 Motherboard Replacement: étape 2, image 2 de 3 Oral-B White Pro 1000 Motherboard Replacement: étape 2, image 3 de 3

    • Pry open the end cap from the toothbrush body.

    • Remove the spring.

    Traduire

  3. Oral-B White Pro 1000 Motherboard Replacement: étape 3, image 1 de 2 Oral-B White Pro 1000 Motherboard Replacement: étape 3, image 2 de 2

    • Apply pressure on the brush shaft to release the toothbrush internals.

    • Remove the internals through the bottom of the toothbrush body.

    Traduire

  5. Oral-B White Pro 1000 Motherboard Replacement: étape 4, image 1 de 2 Oral-B White Pro 1000 Motherboard Replacement: étape 4, image 2 de 2

    • Use flat head screwdriver to remove power button pressure plate.

    Traduire

  6. Oral-B White Pro 1000 Motherboard Replacement: étape 5, image 1 de 3 Oral-B White Pro 1000 Motherboard Replacement: étape 5, image 2 de 3 Oral-B White Pro 1000 Motherboard Replacement: étape 5, image 3 de 3

    • Desolder the coil wire from the motherboard.

    • Check out this helpful guide for some soldering and desoldering tips.

    • Squeeze and remove coil from motherboard.

    Traduire

  7. Oral-B White Pro 1000 Motherboard Replacement: étape 6, image 1 de 2 Oral-B White Pro 1000 Motherboard Replacement: étape 6, image 2 de 2

    • Desolder the motor from motherboard.

    • Remove motherboard and battery from body of toothbrush internals.

    Traduire

  8. Oral-B White Pro 1000 Motherboard Replacement: étape 7, image 1 de 2 Oral-B White Pro 1000 Motherboard Replacement: étape 7, image 2 de 2

    • Desolder the battery connections from the motherboard.

    • Remove motherboard from battery holder.

    Traduire
Conclusion

Reattach new motherboard and reassemble your device following instructions in reverse order. Solder appropriate connections during reassembly.

2 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Hannah Parker

Membre depuis le 11/08/17

203 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

IUPUI, Team S5-G4, Baechle Fall 2017 Membre de l'équipe IUPUI, Team S5-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G4

3 membres

6 tutoriels rédigés

Un commentaire

Motor are brushless?

joseferreira_ms - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 83

Total : 2,605