Réparez vos affaires Communauté Boutique

Ordro HDV-D395 Back Case Replacement

Introduction

If the buttons in the back case of your camcorder are broken, you can replace them by following these steps.

Ce dont vous avez besoin

  1. Ordro HDV-D395 Back Case Replacement, Back Case: étape 1, image 1 de 2 Ordro HDV-D395 Back Case Replacement, Back Case: étape 1, image 2 de 2

    • Pull the slider labeled open, on the bottom right, to unlock the battery.

    Modifier

  2. Ordro HDV-D395 Back Case Replacement: étape 2, image 1 de 1

    • Pull battery out of slot.

    Modifier

  3. Ordro HDV-D395 Back Case Replacement: étape 3, image 1 de 1

    • Unfold the screen from the side of the camera.

    Modifier

  4. Ordro HDV-D395 Back Case Replacement: étape 4, image 1 de 1

    • Twist the screen so that the screen is facing downward.

    Modifier

  6. Ordro HDV-D395 Back Case Replacement: étape 5, image 1 de 2 Ordro HDV-D395 Back Case Replacement: étape 5, image 2 de 2

    • Unscrew the four screws on the side (length 2.9 mm) with a JIS #000 screwdriver.

    • Unscrew the three screws on the bottom (length 7.7 mm) with a JIS #000 screwdriver.

    Modifier

  7. Ordro HDV-D395 Back Case Replacement: étape 6, image 1 de 1

    • Pull apart the camera into two pieces by pulling the side with the screen away from the main body of the camera.

    Modifier

  8. Ordro HDV-D395 Back Case Replacement: étape 7, image 1 de 2 Ordro HDV-D395 Back Case Replacement: étape 7, image 2 de 2

    • Unscrew the two screws (size 4.75 mm) with a PH #00 screwdriver.

    • Unscrew the screw (size 7.65 mm) with a PH #00 screwdriver.

    Modifier

  9. Ordro HDV-D395 Back Case Replacement: étape 8, image 1 de 1

    • Take the back case off by pulling it away from the main body.

    • Be careful not to tear the white strap that connects the back case to the main body.

    Modifier

  10. Ordro HDV-D395 Back Case Replacement: étape 9, image 1 de 1

    • Unscrew all four screws (length 4.13 mm) on the inside of the case with a PH #00 screwdriver.

    Modifier

  11. Ordro HDV-D395 Back Case Replacement: étape 10, image 1 de 1

    • Pull the board away from the back case.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Mostafa Abdulaleem

Membre depuis le 11/05/18

181 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

IUPUI, Team S1-G3, Baechle Fall 2018 Membre de l'équipe IUPUI, Team S1-G3, Baechle Fall 2018

IUPUI-BAECHLE-F18S1G3

3 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 8

Total : 294