Réparez vos affaires Communauté Boutique

Oster 16-Speed Blender Power Cord Replacement

Ce dont vous avez besoin

  1. Oster 16-Speed Blender Power Cord Replacement, Fan and Motor: étape 1, image 1 de 2 Oster 16-Speed Blender Power Cord Replacement, Fan and Motor: étape 1, image 2 de 2

    • Remove the Blender Container from the Blender Base.

    Traduire

  2. Oster 16-Speed Blender Power Cord Replacement: étape 2, image 1 de 2 Oster 16-Speed Blender Power Cord Replacement: étape 2, image 2 de 2

    • Flip the blender so the bottom is facing you.

    Traduire

  3. Oster 16-Speed Blender Power Cord Replacement: étape 3, image 1 de 3 Oster 16-Speed Blender Power Cord Replacement: étape 3, image 2 de 3 Oster 16-Speed Blender Power Cord Replacement: étape 3, image 3 de 3

    • Unscrew the 16mm screws located on the plastic bottom from the blender base using a Phillips #2 screwdriver.

    Traduire

  4. Oster 16-Speed Blender Power Cord Replacement: étape 4, image 1 de 2 Oster 16-Speed Blender Power Cord Replacement: étape 4, image 2 de 2

    • Remove the plastic bottom from the base of the blender.

    Traduire

  5. Oster 16-Speed Blender Power Cord Replacement: étape 5, image 1 de 2 Oster 16-Speed Blender Power Cord Replacement: étape 5, image 2 de 2

    • Holding the center of the fan, grip the knob in the center of the top of the blender with a wrench and twist the wrench counterclockwise.

    Traduire

  7. Oster 16-Speed Blender Power Cord Replacement: étape 6, image 1 de 1

    • Carefully remove the motor and fan from the base of the blender.

    Traduire

  8. Oster 16-Speed Blender Power Cord Replacement: étape 7, image 1 de 3 Oster 16-Speed Blender Power Cord Replacement: étape 7, image 2 de 3 Oster 16-Speed Blender Power Cord Replacement: étape 7, image 3 de 3

    • Now, gently pull the white wire that is connected to the base and the motor.

    • Be careful, as there is a spring behind the contact points, that might try to shoot out and hurt you.

    Traduire

  9. Oster 16-Speed Blender Power Cord Replacement: étape 8, image 1 de 3 Oster 16-Speed Blender Power Cord Replacement: étape 8, image 2 de 3 Oster 16-Speed Blender Power Cord Replacement: étape 8, image 3 de 3

    • Now, turn the motor over, and remove the black wire from the motor.

    • Again, be warned as the is another spring that wants to shoot out and hurt you here as well.

    Traduire

  10. Oster 16-Speed Blender Power Cord Replacement: étape 9, image 1 de 2 Oster 16-Speed Blender Power Cord Replacement: étape 9, image 2 de 2

    • Now de-solder the yellow wire from circuit board. De-solder the wire following these instructions.

    • Be careful, as there is another, black wire, nearby that you do not want to de-solder.

    Traduire

  11. Oster 16-Speed Blender Power Cord Replacement, Circuit Board: étape 10, image 1 de 3 Oster 16-Speed Blender Power Cord Replacement, Circuit Board: étape 10, image 2 de 3 Oster 16-Speed Blender Power Cord Replacement, Circuit Board: étape 10, image 3 de 3

    • Locate the four 11mm screws in the circuit board.

    • Unscrew the four screws using the Phillips #1 screwdriver.

    Traduire

  12. Oster 16-Speed Blender Power Cord Replacement: étape 11, image 1 de 2 Oster 16-Speed Blender Power Cord Replacement: étape 11, image 2 de 2

    • Desolder the circuit board from the base at the indicated point, following the directions by clicking here.

    • Now separate the circuit board from the base.

    Traduire

  13. Oster 16-Speed Blender Power Cord Replacement: étape 12, image 1 de 3 Oster 16-Speed Blender Power Cord Replacement: étape 12, image 2 de 3 Oster 16-Speed Blender Power Cord Replacement: étape 12, image 3 de 3

    • You will see that the circuit board is still attached by a red wire and a black wire.

    • Flip the circuit board back over and desolder at the indicated points following the directions given here.

    Traduire

  14. Oster 16-Speed Blender Power Cord Replacement, Power Cord: étape 13, image 1 de 1

    • You do not have to completely remove the circuit board to replace the power cord. You can, if desired, skip the steps of de-soldering the yellow wire, and the circuit board from the base.

    • De-solder the black wire from the circuit board, and then carefully remove the black wire.

    • Now you can solder on the new power cord.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Dana

Membre depuis le 04/14/14

773 Réputation

5 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team 12-37, Maness Spring 2014 Membre de l'équipe Cal Poly, Team 12-37, Maness Spring 2014

CPSU-MANESS-S14S12G37

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 10

30 derniers jours : 36

Total : 3,138