Aller au contenu principal

Ozeri Pronto ZK14-S LCD Motherboard Replacement

Ce dont vous avez besoin

  1. Ozeri Pronto ZK14-S LCD Motherboard Replacement, Panel Removal: étape 1, image 1 de 2 Ozeri Pronto ZK14-S LCD Motherboard Replacement, Panel Removal: étape 1, image 2 de 2
    • Twist the plastic plate slowly to the left to pull it away.

  2. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 2, image 1 de 1
    • Pry off the sticker at the bottom where the “Ozeri” logo is to reveal a screw. The sticker does not need to be completely removed for the next step.

  3. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 3, image 1 de 1
    • Using the 2.0 Flathead screwdriver, remove the 9.50 mm Phillips head screw under the sticker.

  4. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 4, image 1 de 2 Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 4, image 2 de 2
    • Using the 2.0 Flathead screwdriver, remove the two 18.76 mm Phillips head screws in the plate stand.

  5. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 5, image 1 de 2 Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 5, image 2 de 2
    • Using the 2.0 Flathead screwdriver, remove the 9.44 mm Phillips head screw on the end opposite of the LCD screen.

  6. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 6, image 1 de 1
    • Turn the device over so the back panel is facing up.

  7. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 7, image 1 de 1
    • Using the plastic opening tool, pry off each of the two rubber stubs on the right side and the two stubs on the left side of bottom of the device.

  8. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 8, image 1 de 1
    • Using the 2.0 Flathead screwdriver, remove of the four 9.46 mm Phillips head screws under the removed stubs.

  9. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 9, image 1 de 2 Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 9, image 2 de 2
    • Pry apart the two panels to separate them from each other.

    • Flip the device over so the LCD is facing up. Flip the front panel over on its side.

    • Be careful when separating the panels to avoid damaging the wires they are connected by.

  10. Ozeri Pronto ZK14-S LCD Motherboard Replacement, LCD Motherboard: étape 10, image 1 de 1
    • Stand the center motherboard up.

    • Be careful when standing up the LCD motherboard to avoid damaging the wires it is connected to.

  11. Ozeri Pronto ZK14-S LCD Motherboard Replacement: étape 11, image 1 de 1
    • Unsolder the posts to remove the wires

    • Repeat this step to remove the other two motherboards

Conclusion

To reassemble your device, follow these instructions in reverse order.

Oneika White

Membre depuis le 10/01/15

709 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team 1-4, Leahy Fall 2015 Membre de l'équipe USF Tampa, Team 1-4, Leahy Fall 2015

USFT-LEAHY-F15S1G4

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 8

Total : 474