Réparez vos affaires Communauté Boutique

PDP Rematch Joystick Replacement

Introduction

The Joystick is an essential part of the PDP Rematch controller. Over time, the joysticks may stop working due to wear and tear. If they need replacing, you can buy them separately.

Ce dont vous avez besoin

  1. PDP Rematch Joystick Replacement, Faceplate: étape 1, image 1 de 2 PDP Rematch Joystick Replacement, Faceplate: étape 1, image 2 de 2

    • Grip one side of the controller firmly.

    • Insert an opening pick into the crease between the faceplate and the body of the controller.

    • Once the pick creates a gap in the crease, gently insert another pick into a different section of the crease.

    • Carefully move the picks along the controller's crease line until you hear a popping sound.

    • Gently lift off the faceplate by hand.

    Traduire

  2. PDP Rematch Joystick Replacement: étape 2, image 1 de 2 PDP Rematch Joystick Replacement: étape 2, image 2 de 2

    • Remove the 8 mm screws from the hard cover using a JIS #00 screwdriver.

    • Since the screws have been removed, avoid shaking or moving your controller too much to prevent other buttons from falling out.

    Traduire

  4. PDP Rematch Joystick Replacement: étape 3, image 1 de 2 PDP Rematch Joystick Replacement: étape 3, image 2 de 2

    • Gently lift off the hard cover with your hand; it should not need much force.

    Traduire

  5. PDP Rematch Joystick Replacement, Joystick: étape 4, image 1 de 1

    • The action buttons and silicone pad are loose and may fall out of the controller.

    Traduire

  6. PDP Rematch Joystick Replacement: étape 5, image 1 de 2 PDP Rematch Joystick Replacement: étape 5, image 2 de 2

    • Gently rotate or twist the joystick(s) you want to replace.

    • Apply some force and pull upward towards you.

    • You will know it is released when you hear a popping sound.

    • Place your new joystick and push it downwards; you will hear a popping sound again.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 1 autre contributeur

Amina Begum

Membre depuis le 01/15/24

282 Réputation

2 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Tennessee Tech University, Team 1-3, Pickering Spring 2024 Membre de l'équipe Tennessee Tech University, Team 1-3, Pickering Spring 2024

TNTECH-PICKERING-S24S1G3

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 19

Total : 114