Aller au contenu principal

PS3 Dual Shock 3 Controler Charging Port Replacement

Ce dont vous avez besoin

  1. PS3 Dual Shock 3 Controler Charging Port Replacement, Opening the Controller: étape 1, image 1 de 1
    • Remove the 5 screws on the back of the controller.

    • The back housing of the controller can now be removed.

  2. PS3 Dual Shock 3 Controler Charging Port Replacement, Removing the Battery: étape 2, image 1 de 1
    • Remove battery by unlatching the battery cables from battery connector clip.

  3. PS3 Dual Shock 3 Controler Charging Port Replacement, Freeing the Motherboard: étape 3, image 1 de 1
    • Remove the two screws holding the motherboard to the front controller housing.

    • Next, remove the motherboard assembly from the controller housing. This is done by pressing in the clips on each side of the handle.

    • Freeing the motherboard from the housing will provide better access to the charging port.

  4. PS3 Dual Shock 3 Controler Charging Port Replacement, Preparing the Soldering Station: étape 4, image 1 de 1
    • Prepare your station for the de-soldering of the charging port.

  5. PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: étape 5, image 1 de 3 PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: étape 5, image 2 de 3 PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: étape 5, image 3 de 3
    Outil utilisé dans cette étape :
    Desoldering Pump
    $3.99
    J'achète
    • To remove the defective charging port, you will need to de-solder the 9 pins holding the port to the motherboard.

    • First, used the desoldering pump to remove the solder from all 9 pins.

    • Then, use the desoldering wick to remove any excess solder left on the motherboard.

  6. PS3 Dual Shock 3 Controler Charging Port Replacement, Securing New Charging Port: étape 6, image 1 de 1
    • After the charging port is removed, place the new charging port into position.

    • Hold the new port in place by using a clip to keep it from moving.

  7. PS3 Dual Shock 3 Controler Charging Port Replacement, Soldering The New Port: étape 7, image 1 de 2 PS3 Dual Shock 3 Controler Charging Port Replacement, Soldering The New Port: étape 7, image 2 de 2
    • Tin the soldering iron before soldering the connections. This is done by applying a small amount of solder to the tip of the hot iron.

    • Solder the 9 pin connections that connect the charging port to the motherboard.

Conclusion

To reassemble your device, follow instructions 1-3 in reverse order.

15 autres ont terminé cette réparation.

Attak

Membre depuis le 12/04/17

595 Réputation

1 tutoriel rédigé

5 commentaires

Shall DualShock3 require other than GND and VBUS for charging only

and does DS3 follow the standards of USB-miniB (eg: Data wires flipping).

Sony does have some fame to sacrifice standards over extra capability delivery.

JanLS - Réponse

Would you guys happen to know, if my labeling is correct? I’m going to upgrade to USB-C.

https://imgur.com/a/RL68Yw5

Howling Beats - Réponse

Thank you it's really useful, tips,

Alan - Réponse

Thanks for this. But now there are four different USB charging ports, how to tell which one of them is suitable? kasynparts eg

kasynlife - Réponse

please attak if you still using this platfrom i really need you to help me with a ps3 controller pins

Deyaa Alshapshiri - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 13

7 derniers jours : 70

30 derniers jours : 240

Total : 16,733