Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The Button Board, at the base of the LCD Screen, is held by two clips.
-
Pry these clips over the nubs using a PSP opening tool. This will release the clips.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The Button Board Ribbon Cable is held down with a latch. Lift the latch open, away from the ribbon cable.
-
Pull the cable away from the latch.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The LCD Screen is held by the LCD Frame with similar clips. Slide a thin tool between the clip and the screen and gently pry them apart while beginning to lift the screen.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The LCD screen is still attached with ribbon cables. Gently lift up the LCD screen so you do not break them.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The thin Ribbon Cable opens from the opposite side in which the Ribbon Cable enters. Open up the latch towards the Ribbon Cable. The latch will pull up and release the ribbon cable. Put your tool behind the black part, then pry up the black piece of plastic.
-
The wide Ribbon Cable opens from the same side in which the Ribbon Cable attatches, and opens away from the cable.
-
Both of these latches are the black pieces.
-
Gently pull the ribbon cables away from the latches. The LCD screen can now be removed.
-
Annulation : je n'ai pas terminé ce tutoriel.
70 autres ont terminé cette réparation.
8 commentaires
This is not easy...I tore up the outer casing trying to do this. I better see money in the mail for this
People!! If you weren't gifted in screws and bolts, then bring your console to a repair shop. Seriously blaming this for your Dick Fingers?
dick fingers!!