Introduction
This guide will show you how to remove the drive cage from a Packard Bell 4X4 desktop so you can replace the optical drive, hard drive, or floppy drive.
Ce dont vous avez besoin
-
-
Using a Phillips screwdriver, remove the three Phillips head screws (circled in red) from the back of the computer.
-
-
-
-
Remove the two Philips head screws with your Philips screwdriver. You may have to lubricate these screws as they can be very difficult to remove.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.