Introduction

Installing a new motherboard assembly which contains the processor and software package.

Pièces

Aucune pièce nécessaire.

  1. Place the Palm IIIx face down on a flat surface.
    • Place the Palm IIIx face down on a flat surface.

    Ajouter un commentaire

  2. Push down, lift up on, and remove battery cover.
    • Push down, lift up on, and remove battery cover.

    Ajouter un commentaire

    • Remove the old batteries one at a time.

    Ajouter un commentaire

    • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

    Ajouter un commentaire

  3. Livraison gratuite pour les commandes de plus de 20 $
    Indiquez le code BLUEANDBLACK au moment de payer
    Livraison gratuite pour les commandes de plus de 20 $
    Indiquez le code BLUEANDBLACK
    • Hold the device on its side, positioning your hands as shown.

    • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers.

    Ajouter un commentaire

    • Hold the screen and front cover on its side, facing the screen inward as shown.

    • Position your hands so that you can push the screen outward with your thumbs.

    • Remove the screen by pushing outward with your thumbs. Use your index fingers to hold the front cover in place.

    Ajouter un commentaire

    • Position the device with the screen facing down.

    • Locate the white ribbon wire on the left hand side of the device.

    • On either side of the ribbon wire are two white clasps. Gently push the two clasps away from the board (to the left).

    Ajouter un commentaire

    • Detach the ribbon wire by gently pulling it out of its connector.

    Ajouter un commentaire

    • Separate the motherboard from the screen.

    Ajouter un commentaire

    • Now the motherboard assembly can be replaced successfully.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Ben Johnson

Membre depuis le 26/01/2010

22 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 14-43, Regan Winter 2010 Membre de l'équipe Cal Poly, Team 14-43, Regan Winter 2010

CPSU-REGAN-W10S14G43

5 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 2,714