Aller au contenu principal

Palm IIIx Touch Screen Replacement

Ce dont vous avez besoin

  1. Palm IIIx Touch Screen Replacement, Battery: étape 1, image 1 de 1
    • Place the Palm IIIx face down on a flat surface.

  2. Palm IIIx Touch Screen Replacement: étape 2, image 1 de 1
    • Push down and lift up the battery cover to remove it.

  3. Palm IIIx Touch Screen Replacement: étape 3, image 1 de 1
    • Remove the old batteries one at a time.

  4. Palm IIIx Touch Screen Replacement, Touch Screen: étape 4, image 1 de 1
    • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

  5. Palm IIIx Touch Screen Replacement: étape 5, image 1 de 1
    • Hold the device on its side, positioning your hands as shown.

    • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers.

  6. Palm IIIx Touch Screen Replacement: étape 6, image 1 de 1
    • Hold the screen and front cover on its side, facing the screen inward as shown.

    • Position your hands so that you can push the screen outward with your thumbs.

    • Remove the screen by pushing outward with your thumbs. Use your index fingers to hold the front cover in place.

  7. Palm IIIx Touch Screen Replacement: étape 7, image 1 de 2 Palm IIIx Touch Screen Replacement: étape 7, image 2 de 2
    • Position the device with the screen facing down.

    • Locate the white ribbon wire on the left hand side of the device.

    • On either side of the ribbon wire are two white clasps. Gently push the two clasps away from the board (to the left).

  8. Palm IIIx Touch Screen Replacement: étape 8, image 1 de 1
    • Detach the ribbon wire by gently pulling it out of its connector.

  9. Palm IIIx Touch Screen Replacement: étape 9, image 1 de 1
    • Separate the motherboard from the screen.

  10. Palm IIIx Touch Screen Replacement: étape 10, image 1 de 2 Palm IIIx Touch Screen Replacement: étape 10, image 2 de 2
    • On the back of the screen near the top right corner is a plastic filament:

    • Gently lift up on the two brown clasps on either side of the filament connector as shown.

    • Using a thin, blunt object (a toothpick works well), slide it under the plastic filament and lift up to detach the filament from its connector.

  11. Palm IIIx Touch Screen Replacement: étape 11, image 1 de 1
    • Insert a spudger tool between the metal backing and the glass cover piece, as shown.

    • Run the spudger along the edge of the screen until the screen is lifted and can be removed.

    • Replace or clean as needed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

David Haskell

Membre depuis le 01/21/10

44 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 14-43, Regan Winter 2010 Membre de l'équipe Cal Poly, Team 14-43, Regan Winter 2010

CPSU-REGAN-W10S14G43

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 2,393