Introduction

Removing the batteries is a very simple process that is also a preliminary step to gaining access to the inside of the device.

Turn the device over so it is face down and remove the stylus, and battery cover.
  • Turn the device over so it is face down and remove the stylus, and battery cover.

Ajouter un commentaire

Now remove the two batteries by pulling on the cloth black tab.
  • Now remove the two batteries by pulling on the cloth black tab.

    • Remember, when inserting the batteries, to keep the tab below them to make it easier to remove the batteries in the future.

  • If this tab is not visible, use the flat head screwdriver and gently pry out the batteries by pushing on the positive end (opposite the spring).

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jacob

Membre depuis le 15/04/2010

1 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 16-1, Maness Spring 2010 Membre de l'équipe Cal Poly, Team 16-1, Maness Spring 2010

CPSU-MANESS-S10S16G1

4 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 1,546