Palm Treo 600 Battery Replacement - Tutoriel de réparation iFixit

Introduction

Follow this guide if the battery is dysfunctional and you want to replace it.

Ce dont vous avez besoin

Étape 1 Back Case

Palm Treo 600 Battery Replacement, Back Case: étape 1, image 1 de 1

On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

Étape 2

Palm Treo 600 Battery Replacement: étape 2, image 1 de 2

Palm Treo 600 Battery Replacement: étape 2, image 2 de 2

Use the T6 Torx Screwdriver to remove all 4 screws.
You have to first remove the Stylus to access the 4th screw.

Étape 3

Palm Treo 600 Battery Replacement: étape 3, image 1 de 2

Palm Treo 600 Battery Replacement: étape 3, image 2 de 2

Using a plastic opening tool, carefully separate the front and back cases.
Note: The antenna will detach from the phone.

Étape 4 Battery

Palm Treo 600 Battery Replacement, Battery: étape 4, image 1 de 2

Palm Treo 600 Battery Replacement, Battery: étape 4, image 2 de 2

Using metal tweezers, unplug small white plug.
Pulling the white plug will disconnect the battery. Make sure the phone is off before you do this step.

Étape 5

Palm Treo 600 Battery Replacement: étape 5, image 1 de 1

Slide the flat side of the spudger under the battery and gently dislodge the battery by lifting the spudger up.
The battery may be glued to the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

Clement Poisson

Membre depuis le 01/26/10

24 Réputation

7 tutoriels rédigés

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 13-23, Maness Winter 2010 Membre de l'équipe Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 membres

16 tutoriels rédigés

0 commentaires

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 5,530