Aller au contenu principal

Palm Treo 650 LCD Screen Replacement

Ce dont vous avez besoin

  1. Palm Treo 650 LCD Screen Replacement, Battery and Stylus: étape 1, image 1 de 1
    • Position the phone so the screen faces down.

    • Remove the stylus found on the back of the phone.

  2. Palm Treo 650 LCD Screen Replacement: étape 2, image 1 de 1
    • Hold the button in the middle of the phone's back to remove the battery cover.

    • Slide the cover down to remove it, and set the cover aside.

  3. Palm Treo 650 LCD Screen Replacement: étape 3, image 1 de 2 Palm Treo 650 LCD Screen Replacement: étape 3, image 2 de 2
    • Lift the edge of the battery, separating contact points, and pull out as pictured.

  4. Palm Treo 650 LCD Screen Replacement, Case: étape 4, image 1 de 1
    • Remove the round, rubber cover to expose a screw that will be removed in the next step.

  5. Palm Treo 650 LCD Screen Replacement: étape 5, image 1 de 2 Palm Treo 650 LCD Screen Replacement: étape 5, image 2 de 2
    • Remove the six 6.9 mm screws as pictured with a T5 Torx screwdriver.

    • Remove the single 9.8 mm screw next to the antenna on the back plate, using a Phillips #00 screwdriver.

  6. Palm Treo 650 LCD Screen Replacement: étape 6, image 1 de 1
    • Pull the antenna outward to remove the antenna from the body of the phone.

  7. Palm Treo 650 LCD Screen Replacement: étape 7, image 1 de 2 Palm Treo 650 LCD Screen Replacement: étape 7, image 2 de 2
    • Pry the back cover off using an iFixit opening tool.

    • Several small clips on the inside attach to the back cover.

  8. Palm Treo 650 LCD Screen Replacement, Motherboard: étape 8, image 1 de 3 Palm Treo 650 LCD Screen Replacement, Motherboard: étape 8, image 2 de 3 Palm Treo 650 LCD Screen Replacement, Motherboard: étape 8, image 3 de 3
    • Disconnect the ribbon cable before removing the motherboard.

    • Unclip the gray tab.

    • Pull out the orange ribbon cable.

  9. Palm Treo 650 LCD Screen Replacement: étape 9, image 1 de 2 Palm Treo 650 LCD Screen Replacement: étape 9, image 2 de 2
    • Pull off the motherboard.

  10. Palm Treo 650 LCD Screen Replacement, LCD Screen: étape 10, image 1 de 3 Palm Treo 650 LCD Screen Replacement, LCD Screen: étape 10, image 2 de 3 Palm Treo 650 LCD Screen Replacement, LCD Screen: étape 10, image 3 de 3
    • Lift up the LCD screen so that the ribbon strip connecting it to the motherboard can be accessed.

    • Be careful not to pull off LCD screen yet.

  11. Palm Treo 650 LCD Screen Replacement: étape 11, image 1 de 2 Palm Treo 650 LCD Screen Replacement: étape 11, image 2 de 2
    • Unclip the gray tab.

    • Pull out the orange ribbon strip.

    • Remove the LCD screen.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

cgood

Membre depuis le 10/28/09

122 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 19-3, Maness Fall 2009 Membre de l'équipe Cal Poly, Team 19-3, Maness Fall 2009

CPSU-MANESS-F09S19G3

4 membres

18 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 3

Total : 5,117