Réparez vos affaires Communauté Boutique

Palm Treo 680 screen replacement

Introduction

This guide will show you how to easily remove and repair a dysfunctional Palm Treo 680 LCD Screen/Touch Screen with 4 easy steps.

Ce dont vous avez besoin

  1. Palm Treo 680 screen replacement, Battery: étape 1, image 1 de 2 Palm Treo 680 screen replacement, Battery: étape 1, image 2 de 2

    • Remove the battery cover by pressing on the small rectangular button located on the back of the phone.

    Modifier

    Donde puedo comprar un telefono palm

    lupem5635 - Réponse

    Meurge porfabor

    lupem5635 - Réponse

  2. Palm Treo 680 screen replacement: étape 2, image 1 de 1

    • Remove the battery by pulling it out towards you.

    Modifier

  3. Palm Treo 680 screen replacement, Back Panel: étape 3, image 1 de 2 Palm Treo 680 screen replacement, Back Panel: étape 3, image 2 de 2

    • Remove the stylus in order to access the screw.

    • Remove the 27mm top-left screw using a T6 Torx screwdriver.

    Modifier

    Use a T5 Torx screwdriver instead of a T6. T6 is too big.

    Rhebakah Thomas - Réponse

    I found T5 too large as well. T4 seeems to work

    Absent Minded Professor - Réponse

  4. Palm Treo 680 screen replacement: étape 4, image 1 de 2 Palm Treo 680 screen replacement: étape 4, image 2 de 2

    • Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner.

    • Remove the 27mm screw using the T6 Torx screwdriver.

    • If there is a red Palm sticker covering this screw, puncture it to access the screw.

    Modifier

  5. Palm Treo 680 screen replacement: étape 5, image 1 de 1

    • Remove the remaining two 27mm screws from the bottom using the T6 screwdriver.

    Modifier

  6. Palm Treo 680 screen replacement: étape 6, image 1 de 3 Palm Treo 680 screen replacement: étape 6, image 2 de 3 Palm Treo 680 screen replacement: étape 6, image 3 de 3

    • Turn the phone so the screen is facing the right side.

    • Use a spudger to carefully separate the back panel from the front panel to access components inside the phone.

    • Separate the covers from the left side of the device as indicated in the picture.

    • The right side contains orange ribbons that are easily damaged.

    Modifier

  7. Palm Treo 680 screen replacement, LCD Screen and Touch Screen: étape 7, image 1 de 3 Palm Treo 680 screen replacement, LCD Screen and Touch Screen: étape 7, image 2 de 3 Palm Treo 680 screen replacement, LCD Screen and Touch Screen: étape 7, image 3 de 3

    • Take the front of the pannel and take notice that the screen is attached by a piece of silver tape.

    • Using a pair of tweezers, carefully peel off this piece of silver tape.

    • Remove the screen from the front pannel by pushing it out.

    Modifier

  8. Palm Treo 680 screen replacement: étape 8, image 1 de 2 Palm Treo 680 screen replacement: étape 8, image 2 de 2

    • Locate the 2 small plastic flaps that hold the small orange ribbons in place on both sides. Using a small metal spudger, flip up both of the flaps.

    • Do the same thing for one flap that you do for the other.

    Modifier

  9. Palm Treo 680 screen replacement: étape 9, image 1 de 3 Palm Treo 680 screen replacement: étape 9, image 2 de 3 Palm Treo 680 screen replacement: étape 9, image 3 de 3

    • Flip the screen over 180 degrees and take off the metal piece that cushions the screen.

    • Flip the screen over another another 180 degrees and place pressure on the bottom ribbon (Where my left thumb is).

    • Do not pull the two screens completely apart yet.

    • Slightly start to pull apart the touch screen from the LCD screen by placing your thumbs where my thumbs are.

    • This part is tricky and might take some maneuvering and a little bit of force, but it is possible!

    Modifier

  10. Palm Treo 680 screen replacement: étape 10, image 1 de 3 Palm Treo 680 screen replacement: étape 10, image 2 de 3 Palm Treo 680 screen replacement: étape 10, image 3 de 3

    • Move your thumbs to the other corner of the screen and slightly start to pull apart the touch screen from the LCD screen.

    • Carefully peel the touch screen away from the LCD screen.

    • Now you should have both the touch screen and LCD screen detached from one another.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 8 autres contributeurs

Maiya123

Membre depuis le 10/22/09

51 Réputation

6 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Cal Poly, Team 6-4, Maness Fall 2009 Membre de l'équipe Cal Poly, Team 6-4, Maness Fall 2009

CPSU-MANESS-F09S6G4

4 membres

12 tutoriels rédigés

2 commentaires

where can i get the new touch scree, actually my mobile has fallen down and broken the touch scree. i am a resident in India, Andhra Pradesh, Hyderabad........at Ramkote.... please give me message at chinthala.prasad@yahoo.com please

chinthalaprasad - Réponse

These are very nice instructions. They are clear and detailed for anyone to follow. Thanks for putting together the steps and sharing it.

I have not tried all steps completely yet. But will do so. I will left with probably a question what to do with touch screen. My phone has

never fallen down nor damaged. It worked perfectly well and one fine day, touch screen stopped working. In any case, I will try.

RJ

Ravi Joshi - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 6,429