Aller au contenu principal

Palm Treo 700P Back Case Replacement

Ce dont vous avez besoin

  1. Palm Treo 700P Back Case Replacement, Battery: étape 1, image 1 de 3 Palm Treo 700P Back Case Replacement, Battery: étape 1, image 2 de 3 Palm Treo 700P Back Case Replacement, Battery: étape 1, image 3 de 3
    • Press the button located just above the Sprint™ logo and then slide the cover down.

  2. Palm Treo 700P Back Case Replacement: étape 2, image 1 de 2 Palm Treo 700P Back Case Replacement: étape 2, image 2 de 2
    • Use the small notch on the left hand side of the phone to remove the battery.

  3. Palm Treo 700P Back Case Replacement, Back Case: étape 3, image 1 de 1
    • Remove the stylus from the phone.

  4. Palm Treo 700P Back Case Replacement: étape 4, image 1 de 1
    • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

  5. Palm Treo 700P Back Case Replacement: étape 5, image 1 de 1
    • Using the spudger, remove the small rubberized patch under the antenna.

  6. Palm Treo 700P Back Case Replacement: étape 6, image 1 de 1
    • Unscrew the last two screws using the previous screw driver.

  7. Palm Treo 700P Back Case Replacement: étape 7, image 1 de 2 Palm Treo 700P Back Case Replacement: étape 7, image 2 de 2
    • Using the plastic opening tool, gently separate the back case from the phone body.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

James Smith

Membre depuis le 04/27/12

10 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 12-37, Regan Spring 2012 Membre de l'équipe Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 634