Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.
-