Réparez vos affaires Communauté Boutique

Palm Zire 71 Battery Replacement

Introduction

This guide is to show you how to replace the battery on Palm Zire 71.

Ce dont vous avez besoin

  1. Palm Zire 71 Battery Replacement, Preparation: étape 1, image 1 de 1

    • Flip the phone so it's facing screen-side down.

    • Slide the back cover upward to open.

    Traduire

  2. Palm Zire 71 Battery Replacement, Top Screws (2) Removal: étape 2, image 1 de 1

    • Use a Torx T5 screwdriver to remove the top two screws.

    Traduire

  3. Palm Zire 71 Battery Replacement, Bottom Screws (3) Removal: étape 3, image 1 de 1

    • Remove the back sticker.

    • Remove the three bottom Phillips #00 screws.

    Traduire

  4. Palm Zire 71 Battery Replacement, Front Panel Removal: étape 4, image 1 de 2 Palm Zire 71 Battery Replacement, Front Panel Removal: étape 4, image 2 de 2

    • Flip the phone over so it's facing screen-side up.

    • Slide the screen upward by a few millimeters without detaching the screen.

    • Use the plastic opening tool to pry off the front panel.

    Traduire

  6. Palm Zire 71 Battery Replacement, Bracket and Speaker Removal: étape 5, image 1 de 2 Palm Zire 71 Battery Replacement, Bracket and Speaker Removal: étape 5, image 2 de 2

    • Remove the bottom two Phillips #00 screws.

    • Remove the bracket.

    • Use the plastic opening tool to pry off the speaker.

    Traduire

  7. Palm Zire 71 Battery Replacement, Back Cover: étape 6, image 1 de 2 Palm Zire 71 Battery Replacement, Back Cover: étape 6, image 2 de 2

    • Slide the back cover off.

    Traduire

  8. Palm Zire 71 Battery Replacement, Battery: étape 7, image 1 de 1

    • Remove the Philips #00 screw

    • Remove the sliver metal piece

    Traduire

  9. Palm Zire 71 Battery Replacement: étape 8, image 1 de 2 Palm Zire 71 Battery Replacement: étape 8, image 2 de 2

    • Remove the Philips screws #00

    • Remove the rear blue panel by prying both sides using the plastic opening tool

    Traduire

  10. Palm Zire 71 Battery Replacement: étape 9, image 1 de 3 Palm Zire 71 Battery Replacement: étape 9, image 2 de 3 Palm Zire 71 Battery Replacement: étape 9, image 3 de 3

    • Remove the black plastic sticker

    • Pull the tap up to remove the metal cap

    Traduire

  11. Palm Zire 71 Battery Replacement: étape 10, image 1 de 3 Palm Zire 71 Battery Replacement: étape 10, image 2 de 3 Palm Zire 71 Battery Replacement: étape 10, image 3 de 3

    • Remove the cable by pinching the sides and pulling

    • Pry off the battery with the plastic opening tool

    • Insert the new battery

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Jinxian Jiang

Membre depuis le 04/28/11

245 Réputation

3 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

CSU Los Angeles, Team 1-5, Nelson Spring 2011 Membre de l'équipe CSU Los Angeles, Team 1-5, Nelson Spring 2011

CSULA-NELSON-S11S1G5

3 membres

6 tutoriels rédigés

Un commentaire

It's clear they just want you to throw it away when the battery dies. That was quite a chore getting the parts off and such without destroying the circuit board and that fine ribbon cable. Got it done though. No wifi I see. Too bad.

dnphoton - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 58

Total : 9,047