Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift up the flap on the Palm Zire M150.
-
If you wish to remove it, gently lift up on the flap and pull horizontally. It should come off without an issue.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Take the screwdriver from the IFixit toolkit and use the T6 bit. Unscrew the the top two 3mm screws above where the flap was connected to the device.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently pull the top half and bottom half off the device apart using both hands so that it looks like the second photo.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
This is the button that you are going to be replacing. Grab the grey button and pull it apart from the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
The button is now off of the device. If you are cleaning it, use the compressed air or the alcohol wipe.
-
If installing a new button, throw away the one you just took off and snap the new one back on the white piece.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.