Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Palm m105 Batteries Replacement

  1. Palm m105 Batteries Replacement, Batteries: étape 1, image 1 de 1
    • Press the latch on the battery door on the back of the device and pull outwards.

    • Back the device up if possible, you may lose all your data if there is no power for a little too long for it to retain it, make sure this is done quickly.

  2. Palm m105 Batteries Replacement: étape 2, image 1 de 1
    • Install two AAA alkaline batteries into the battery compartment, placing the positive and negative ends of the battery in the correct positions. (Shown as a diagram inside the battery compartment)

    • Make sure to remove one battery at a time and replace with fresh battery. This will retain information on the device.

  3. Palm m105 Batteries Replacement: étape 3, image 1 de 1
    • Place the battery door back into place on the back of the device; it will make a 'click' sound when properly reattached.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Erik Thompson

Membre depuis le 10/04/11

31 Réputation

5 tutoriels rédigés

Équipe

UW Stout, Team 1-3, Zhou Fall 2011 Membre de l'équipe UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 membres

7 tutoriels rédigés

Un commentaire

"Moderate difficulty"?? There's only three steps and two of them involve removing and reinstalling the battery door.

Gene Merritt - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 1,226