Aller au contenu principal

Introduction

Replacement parts can be hard to find. The case on the m105 can be easily removed, and a replacement shell casing can be used to replace your damaged one. Check out this site here to buy a replacement.

Pièces

Aucune pièce spécifiée.

  1. Remove the protective flip lid of the device. Open lid and pull. There are two clips that will pop out.
    • Remove the protective flip lid of the device. Open lid and pull. There are two clips that will pop out.

  2. Next, remove the plate on the top of the device. There is a tab at the top that un- clips and allows you to remove the face plate.
    • Next, remove the plate on the top of the device. There is a tab at the top that un- clips and allows you to remove the face plate.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Remove the batteries by opening the battery compartment on the back of the device. Remove one battery at a time.
    • Remove the batteries by opening the battery compartment on the back of the device. Remove one battery at a time.

  5. Using a T-5 Torx screwdriver, remove all four screws at the back of device by turning counterclockwise. Screwdriver located here. Using a T-5 Torx screwdriver, remove all four screws at the back of device by turning counterclockwise. Screwdriver located here.
    • Using a T-5 Torx screwdriver, remove all four screws at the back of device by turning counterclockwise. Screwdriver located here.

  6. Once the four screws are removed, you are able to remove the back and front cover from the interior parts of the device. Once the four screws are removed, you are able to remove the back and front cover from the interior parts of the device. Once the four screws are removed, you are able to remove the back and front cover from the interior parts of the device.
    • Once the four screws are removed, you are able to remove the back and front cover from the interior parts of the device.

  7. This is what the case of the device should look like when compleated.
Conclusion

To reassemble your device, follow these instructions in reverse order.

Travis

Membre depuis le 04/10/2011

4 Réputation

1 tutoriel rédigé

Équipe

UW Stout, Team 1-3, Zhou Fall 2011 Membre de l'équipe UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 592