Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the protective flip lid of the device. Open the lid and pull.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unclip the tab at the top of the device, to remove the face plate.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the batteries by opening the battery compartment on the back of the device.
-
Remove one battery at a time.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a T-5 Torx screwdriver, remove all four screws at the back of the device by turning them counterclockwise. A sample screwdriver is located here.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the back and front cover from the interior parts of the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
This is what the case of the device should look like when completed.
-
You can purchase a new shell here: Replacement Shell Palm m105
-