Introduction

This guide will show you how to replace the door covering the battery compartment. Overall this guide does not take much knowledge regarding disassembly, however you should take care to remember how the parts are situated before removing them.

Pièces

Aucune pièce nécessaire.

Set the switch on the battery door to "open," and open the door.
  • Set the switch on the battery door to "open," and open the door.

Ajouter un commentaire

At the left hand side, locate the head of the metal bar that holds the spring in place.
  • At the left hand side, locate the head of the metal bar that holds the spring in place.

Ajouter un commentaire

  • Push the metal bar down using the metal tweezers.

Ajouter un commentaire

  • Pull the metal bar that holds the spring in place out.

  • You can also use tweezers for this step, although we found it easier to just use our fingers.

Ajouter un commentaire

  • Remove the battery access door from the device.

  • In order to keep the "springiness" of the door, be sure that the long arm of the spring is not over the hole for the battery.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zhentao

Membre depuis le 30/01/2018

229 Réputation

2 tutoriels rédigés

Équipe

Baylor, Team S2-G3, Johnson Spring 2018 Membre de l'équipe Baylor, Team S2-G3, Johnson Spring 2018

BU-JOHNSON-S18S2G3

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 32