Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Eject the disk tray from the DVD player before removing power supply.
    • Eject the disk tray from the DVD player before removing power supply.

  2. Evenly lift upward on the disk tray front cover (not slanted, as pictured). This will allow for easier dissasembly of the player.
    • Evenly lift upward on the disk tray front cover (not slanted, as pictured). This will allow for easier dissasembly of the player.

  3. Ignorez les nouveaux gadgets.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Ignorez les nouveaux gadgets.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Remove 3 screws running along back edge of case cover. Remove 2 screws from each side of case cover.
    • Remove 3 screws running along back edge of case cover.

    • Remove 2 screws from each side of case cover.

  5. Grab edges of cover, pull outward slightly, and pull straight up.
    • Grab edges of cover, pull outward slightly, and pull straight up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Kevin

Membre depuis le 26/04/2011

354 Réputation

8 tutoriels rédigés

Équipe

Cal Poly, Team 18-20, Garner Spring 2011 Membre de l'équipe Cal Poly, Team 18-20, Garner Spring 2011

CPSU-GARNER-S11S18G20

4 membres

11 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,658