Réparez vos affaires Communauté Boutique

Panasonic KX-E603 Fuse Replacement

Introduction

This guide will demonstrate how to replace the fuse on your typewriter, step-by-step.

Ce dont vous avez besoin

  1. Panasonic KX-E603 Fuse Replacement, Case: étape 1, image 1 de 2 Panasonic KX-E603 Fuse Replacement, Case: étape 1, image 2 de 2

    • Flip the typewriter to expose the bottom body panel.

    • Be careful to not damage the top surface of the typewriter when you rest it upside-down.

    Modifier

  2. Panasonic KX-E603 Fuse Replacement: étape 2, image 1 de 1

    • Remove the three 19 mm screws located in the recessed holes on the edge of the black underside panel using a Phillips #2 screwdriver.

    Modifier

  3. Panasonic KX-E603 Fuse Replacement: étape 3, image 1 de 1

    • Flip the typewriter back to its original orientation, then rotate it so that the rear is facing towards you.

    • Remove the three 19 mm screws near the bottom of the tan body panel using a Phillips #2 screwdriver.

    Modifier

  4. Panasonic KX-E603 Fuse Replacement: étape 4, image 1 de 2 Panasonic KX-E603 Fuse Replacement: étape 4, image 2 de 2

    • Open the typewriter lid and push the carriage away to expose the two screws holding the case to the chassis.

    • Remove the two 19 mm screws using a Phillips #2 screwdriver.

    Modifier

  6. Panasonic KX-E603 Fuse Replacement: étape 5, image 1 de 2 Panasonic KX-E603 Fuse Replacement: étape 5, image 2 de 2

    • Flip the plastic lever on the right side of the roller wheel to disengage the paper lock.

    Modifier

  7. Panasonic KX-E603 Fuse Replacement: étape 6, image 1 de 3 Panasonic KX-E603 Fuse Replacement: étape 6, image 2 de 3 Panasonic KX-E603 Fuse Replacement: étape 6, image 3 de 3

    • Remove the roller wheel adjustment knobs by pulling firmly outward.

    • Both black knobs must be removed in this step.

    Modifier

  8. Panasonic KX-E603 Fuse Replacement: étape 7, image 1 de 2 Panasonic KX-E603 Fuse Replacement: étape 7, image 2 de 2

    • Unlock the roller wheel by simultaneously pressing down on the two spring levers on the left and right of the roller ends.

    Modifier

  9. Panasonic KX-E603 Fuse Replacement: étape 8, image 1 de 2 Panasonic KX-E603 Fuse Replacement: étape 8, image 2 de 2

    • While both spring levers are depressed, lift up with both hands to remove the roller wheel.

    Modifier

  10. Panasonic KX-E603 Fuse Replacement: étape 9, image 1 de 3 Panasonic KX-E603 Fuse Replacement: étape 9, image 2 de 3 Panasonic KX-E603 Fuse Replacement: étape 9, image 3 de 3

    • Flip the top down. Then, with both hands, lift straight up on the tan case to remove it from the chassis.

    Modifier

  11. Panasonic KX-E603 Fuse Replacement, Fuse: étape 10, image 1 de 1

    • The capacitors can be a shock hazard, avoid touching them.

    • The fuse can be found very close to two large, blue capacitors near the rear of the typewriter.

    Modifier

  12. Panasonic KX-E603 Fuse Replacement: étape 11, image 1 de 1

    • The fuse body is made from glass; be careful not to use too much force or it could break.

    • Firmly grasp the fuse between your fingers and pull upwards to remove it from its mount.

    • If the fuse is difficult to grasp with your hands, a spudger may be used instead.

    Modifier
Conclusion

To reassemble your device, use the new fuse and follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Lindsay Stratis

Membre depuis le 04/08/15

491 Réputation

4 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team 17-1, Forte Spring 2015 Membre de l'équipe Cal Poly, Team 17-1, Forte Spring 2015

CPSU-FORTE-S15S17G1

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 414