Menu 

Vos paramètres

Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils
Mon panier (US Store)

On dirait que votre panier est vide

Parcourez notre boutique

Panasonic Lumix DMC-FX01 Flash Top Assembly Replacement

Rédigé par : Caleb Fink (et 7 autres contributeurs)
  • Commentaires : 0
  • Favoris : 2

Difficulté

Modérée

Étapes

11

Sections

3

Drapeaux

0

Introduction

This guide will show the user how to disassemble the camera to reach the Flash Top Assembly. Once the Flash Top Assembly is reached, the user can replace it.

Outils

Acheter ces outils

Pièces

Aucune pièce nécessaire.

  1. Locate the memory card and battery card latch on the bottom of the camera.

    • Locate the memory card and battery card latch on the bottom of the camera.

    • Slide the latch to the open position.

    Modifier

  2. Open the battery latch, and slide the battery release lever to the right.

    • Open the battery latch, and slide the battery release lever to the right.

    Modifier

  3. Remove the battery from the camera.

    • Remove the battery from the camera.

    Modifier

  4. Using a size #00 Phillips screwdriver, remove the three 4.58 mm screws on the bottom of the camera.

    • Using a size #00 Phillips screwdriver, remove the three 4.58 mm screws on the bottom of the camera.

    • Use this screwdriver for all screws in the device.

    Modifier

  5. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique

  6. Remove the 3.15 mm screw on the left side of the camera.

    • Remove the 3.15 mm screw on the left side of the camera.

    Modifier

  7. Remove the left side casing. Remove the left side casing.

    • Remove the left side casing.

    Modifier

  8. Remove the two 3.15 mm screws on the right side of the camera.

    • Remove the two 3.15 mm screws on the right side of the camera.

    Modifier

  9. Remove the bottom right panel.

    • Remove the bottom right panel.

    Modifier

  10. Gently remove the back casing. Start at the bottom and carefully pry towards the top to get this piece free.

    • Gently remove the back casing.

    • Start at the bottom and carefully pry towards the top to get this piece free.

    Modifier

  11. Carefully pry the Flash Top Assembly away from the top. Carefully pry the Flash Top Assembly away from the top.

    • Carefully pry the Flash Top Assembly away from the top.

    Modifier

  12. Replace the Flash Top Assembly with a new one. Replace the Flash Top Assembly with a new one.

    • Replace the Flash Top Assembly with a new one.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 7 autres contributeurs

Caleb Fink

Membre depuis le 11/10/2010

186 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 9-22, Regan Fall 2010 Membre de l'équipe Cal Poly, Team 9-22, Regan Fall 2010

CPSU-REGAN-F10S9G22

4 membres

8 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 3

Total : 3,538