Aller au contenu principal

Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement

Ce dont vous avez besoin

  1. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement, Battery: étape 1, image 1 de 1
    • Locate the memory card and battery card latch on the bottom of the camera.

    • Slide the latch to the open position.

  2. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 2, image 1 de 1
    • Open the battery latch, and slide the battery release lever to the right.

  3. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 3, image 1 de 1
    • Remove the battery from the camera.

  4. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement, Rear Casing: étape 4, image 1 de 1
    • Remove the three 4.6 mm screws on the bottom of the camera using a Phillips #00 screwdriver.

  5. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 5, image 1 de 1
    • Remove the single 3.2 mm screw on the left side of the camera using a Phillips #00 screwdriver.

  6. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 6, image 1 de 2 Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 6, image 2 de 2
    • Remove the left side casing.

  7. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 7, image 1 de 1
    • Remove the two 3.2 mm screws on the right side of the camera using a Phillips #00 screwdriver.

  8. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 8, image 1 de 1
    • Remove the bottom right panel.

  9. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 9, image 1 de 2 Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 9, image 2 de 2
    • Gently remove the back casing.

    • Start at the bottom and carefully pry towards the top to get this piece free.

  10. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement, LCD Screen: étape 10, image 1 de 1
    • Gently lift up the LCD screen.

    • Using a plastic prying tool, flip up the latch that holds the thin ribbon in place.

    • It should fall out on its own or with a gentle tug.

  11. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 11, image 1 de 1
    • Gently tug the thicker ribbon to remove it from its housing.

  12. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement, On/ Off Button and Settings Button: étape 12, image 1 de 2 Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement, On/ Off Button and Settings Button: étape 12, image 2 de 2
    • Carefully remove the upper assembly, which houses the buttons and the flash battery.

  13. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 13, image 1 de 1
    • Remove the two 3mm screws.

  14. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 14, image 1 de 2 Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 14, image 2 de 2
    • Pry bars back gently as shown.

    • Fingers can be used but tool is shown for clarity.

  15. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 15, image 1 de 2 Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 15, image 2 de 2
    • After, releasing all the components, gently remove the flash assembly from the casing.

  16. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 16, image 1 de 1
    • Remove the 1.2 mm screw from the settings wheel.

  17. Panasonic Lumix DMC-FX01 On/ Off and Settings Button cover replacement: étape 17, image 1 de 1
    • Replace buttons.

    • Replace the "On/ Off" button with the prongs facing away from the flash.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Andrew

Membre depuis le 10/11/10

396 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 9-22, Regan Fall 2010 Membre de l'équipe Cal Poly, Team 9-22, Regan Fall 2010

CPSU-REGAN-F10S9G22

4 membres

8 tutoriels rédigés

Un commentaire

Olá ! Sugiro ter cuidado com a carga do capacitor do flash, melhor descarrega-lo com auxílio de uma lâmpada ou resistor

para evitar um choque elétrico.

Ricardo Britto - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 7

Total : 5,079