Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Move the switch on the battery door to the Open position.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push the small gray tab on the top right corner to the left. The battery will pop out slightly.
-
Keep your finger clear of the battery when it pops out.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Push the memory card in and let go.
-
Pull out the memory card.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the small screws on the sides of the camera.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the three small screws on the bottom(#00P, 3.3mm).
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift up the bottom back cover by prying the bottom edge with the spudger.
-
Gently lift up the back cover with your hand from the bottom to the top.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the tabs on the ZIF connectors.
-
The ribbon cables should easily come out of the ZIF connectors.
-