Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
This guide will demonstrate how to install the USB Ports on your camera.
Ce dont vous avez besoin
-
-
-
Using the spudger, pry off the top cover by gliding the spudger along the entire edge between the top cover and the front cover.
-
-
-
Remove the small screw in the hole towards the top of the camera(#00P, 5.4mm).
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.