Make sure the power is off by switching  the power switch to the left.
  • Make sure the power is off by switching the power switch to the left.

Ajouter un commentaire

Use a Phillips #00 screwdriver to remove the screws on the left side of the camera.
  • Use a Phillips #00 screwdriver to remove the screws on the left side of the camera.

Ajouter un commentaire

  • Remove the screws on the right side of the camera by using the Philips #00 screwdriver.

Ajouter un commentaire

  • Remove the screws on the bottom side of the camera using the Philips #00 Screwdriver.

  • Separate the covers by gently applying force upwards, carefully placing the opening tool between the two covers.

Ajouter un commentaire

  • Lift the ZIF tabs up with the opening tool and carefully remove the digitizer ribbon cables.

  • Remove the LCD Screen from the glass frame carefully with the opening tool.

Ajouter un commentaire

  • Push on the back panel buttons on the front side to remove the buttons.

  • Be cautious of the adhesive holding the button panels to the cover. Apply extra force if necessary.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kriselle Tubongbanua

Membre depuis le 21/02/2018

133 Réputation

1 tutoriel rédigé

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 24