Réparez vos affaires Communauté Boutique

Panasonic Lumix DMC-GX85 Main PCB Replacement

Introduction

The Main PCB is one of the most important parts of the Panasonic Lumix DMC-GX85; it cannot function properly without one. Replacing a faulty Main PCB is made easy here.

Ce dont vous avez besoin

  1. Panasonic Lumix DMC-GX85 Main PCB Replacement, Rear Cover: étape 1, image 1 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement, Rear Cover: étape 1, image 2 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement, Rear Cover: étape 1, image 3 de 3

    • Remove the plastic hot shoe cover by sliding it towards the rear of the camera.

    Traduire

  2. Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 2, image 1 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 2, image 2 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 2, image 3 de 3

    • Using a spudger, gently lift the forward end of the shoe spring to disengage its locking mechanism.

    • While holding the forward end of the shoe spring up, push from its lifted end to remove the shoe spring.

    Traduire

  3. Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 3, image 1 de 2 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 3, image 2 de 2

    • Remove the two 6.0mm silver Phillips #0 screws closest to the display screen.

    • Do not remove the two forward-most silver screws.

    Traduire

  4. Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 4, image 1 de 2 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 4, image 2 de 2

    • Turn the camera so the side with the jack cover is facing you.

    • Near the camera's top end, remove the 4.0mm black Phillips #0 screw on the bottom in this orientation.

    • Open the jack cover and remove the 4.0mm black Phillips #0 screw inside.

    Traduire

  6. Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 5, image 1 de 2 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 5, image 2 de 2

    • Flip the camera upside down so the bottom of the camera is facing you.

    • Remove the two center 2.5mm black Phillips #0 screws.

    • Remove the outer 4.5mm black Phillips #0 screw.

    Traduire

  7. Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 6, image 1 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 6, image 2 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 6, image 3 de 3

    • Turn the camera so the display screen is facing you.

    • Rotate the top of the screen away from the camera body to access and remove the 4.5mm black Phillips #0 screw.

    • Remove the rear camera cover by gently pulling from the top side.

    • When removing the rear cover, pull apart slowly to prevent damaging the ribbon cable connecting the display screen and the Sub PCB.

    Traduire

  8. Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 7, image 1 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 7, image 2 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 7, image 3 de 3

    • Turn the camera so the lens is facing down with the rear cover pulled back.

    • Disconnect the ribbon cable from the camera by pulling up on the black locking tab with an iFixit opening tool.

    • Pull the ribbon cable from the connector. The rear cover is now completely detached from the camera.

    • Do not bend the ribbon cable excessively and take care not to damage the ribbon cable.

    Traduire

  9. Panasonic Lumix DMC-GX85 Main PCB Replacement, Main PCB: étape 8, image 1 de 2 Panasonic Lumix DMC-GX85 Main PCB Replacement, Main PCB: étape 8, image 2 de 2

    • Remove the three 3.5mm silver Phillips #0 screws mounting the main PCB to the camera frame.

    Traduire

  10. Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 9, image 1 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 9, image 2 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 9, image 3 de 3

    • Disconnect the eight ribbon cables from the main PCB by pulling up on the black locking tabs with an iFixit opening tool.

    • Pull the ribbon cables from the connectors.

    • Do not bend the ribbon cable excessively and take care not to damage the ribbon cable.

    Traduire

  11. Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 10, image 1 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 10, image 2 de 3 Panasonic Lumix DMC-GX85 Main PCB Replacement: étape 10, image 3 de 3

    • Gently lift the motherboard away from the camera body.

    • When removing the main PCB, take care not to lose the battery earth plate.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

2 commentaires

Good day. How do I get the board both of the, the one on the right and one on d left

Tobas - Réponse

Where i can find this replacement ? DMC-GX85 Main PCB Replacement

vissente tapia cuevas - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 10

30 derniers jours : 57

Total : 2,749