Réparez vos affaires Communauté Boutique

Panasonic Lumix DMC-TZ5 button board Replacement

Ce dont vous avez besoin

  1. Panasonic Lumix DMC-TZ5 button board Replacement, Back Cover: étape 1, image 1 de 1

    • Remove the battery and memory card from the device.

    Modifier

  2. Panasonic Lumix DMC-TZ5 button board Replacement: étape 2, image 1 de 1

    • Remove 4 screws from the right side of the camera.

    • There are two 3.4mm screws at the top.

    • There are two 2.2mm screws at the bottom.

    Modifier

  3. Panasonic Lumix DMC-TZ5 button board Replacement: étape 3, image 1 de 1

    • Remove the single 3.4mm screw on the left side of the camera.

    Modifier

  4. Panasonic Lumix DMC-TZ5 button board Replacement: étape 4, image 1 de 1

    • Remove 5 screws from the base of the camera.

    • There are two 2.2mm screws next to the battery compartment.

    • There are three 4mm screws around the tripod mount.

    Modifier

  6. Panasonic Lumix DMC-TZ5 button board Replacement: étape 5, image 1 de 1

    • Slowly slide the back cover away from the device

    • The back casing is held in place by two ribbon cables. Do not pull the back cover too far from the camera.

    Modifier

  7. Panasonic Lumix DMC-TZ5 button board Replacement: étape 6, image 1 de 2 Panasonic Lumix DMC-TZ5 button board Replacement: étape 6, image 2 de 2

    • Detach both ribbon cables using a spudger.

    • Use the tip of the spudger to lift the black clip upward, unlocking the ribbon cable.

    Modifier

  8. Panasonic Lumix DMC-TZ5 button board Replacement: étape 7, image 1 de 1

    • Remove the back casing from the camera.

    Modifier

  9. Panasonic Lumix DMC-TZ5 button board Replacement, button board: étape 8, image 1 de 2 Panasonic Lumix DMC-TZ5 button board Replacement, button board: étape 8, image 2 de 2

    • Use the spudger to remove the ribbon cable connecting the lens casing to the circuit board by lifting up the black clip.

    • Carefully remove the function switch cover. This unit snaps on and off.

    Modifier

  10. Panasonic Lumix DMC-TZ5 button board Replacement: étape 9, image 1 de 1

    • Carefully unsnap the front logic board from the rear logic board using a spudger.

    Modifier

  11. Panasonic Lumix DMC-TZ5 button board Replacement: étape 10, image 1 de 2 Panasonic Lumix DMC-TZ5 button board Replacement: étape 10, image 2 de 2

    • Slide the entire top part of the camera that is attached to the logic board, horizontally away from the camera.

    Modifier

  12. Panasonic Lumix DMC-TZ5 button board Replacement: étape 11, image 1 de 3 Panasonic Lumix DMC-TZ5 button board Replacement: étape 11, image 2 de 3 Panasonic Lumix DMC-TZ5 button board Replacement: étape 11, image 3 de 3

    • Remove the ribbon cable from the top connection panel by unlocking the black clip with a spudger.

    • This leaves you with the logic board and the top connection panel separate and free from the camera

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Ben Canfield

Membre depuis le 10/10/10

409 Réputation

3 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Cal Poly, Team 9-21, Regan Fall 2010 Membre de l'équipe Cal Poly, Team 9-21, Regan Fall 2010

CPSU-REGAN-F10S9G21

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 5,595