Aller au contenu principal

Introduction

This guide will teach you step by step on how to replace broken or malfunctioning LCD screens.

  1. Remove the battery and SD card
    • Remove the battery and SD card

  2. Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver Unscrew the two 1.0 mm screws to the left  with a Phillips #000 screwdriver Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver
    • Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver

    • Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver

    • Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Carefully separate the back of the camera from the main body
    • Carefully separate the back of the camera from the main body

    • Do not apply excessive force. The LCD is connected by ribbon cables that can be easily damaged

  5. Use the tip of the 2.0 mm flathead screwdriver to flip up the black tabs on the ribbon cables Pull gently on the ribbon cables to unseat them
    • Use the tip of the 2.0 mm flathead screwdriver to flip up the black tabs on the ribbon cables

    • Pull gently on the ribbon cables to unseat them

  6. Use the tip of the 2.0 mm flathead to flip up the metal tabs
    • Use the tip of the 2.0 mm flathead to flip up the metal tabs

    • Carefully lift the LCD panel out of place

Conclusion

To reassemble your device, follow these instructions in reverse order.

Derrick Thompson

Membre depuis le 30/01/2018

1 035 Réputation

5 tutoriels rédigés

Équipe

Baylor, Team S2-G5, Johnson Spring 2018 Membre de l'équipe Baylor, Team S2-G5, Johnson Spring 2018

BU-JOHNSON-S18S2G5

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 55