Réparez vos affaires Communauté Boutique

Panasonic PV-GS9 LCD panel replacement

Introduction

This guide shows how to remove the side panel containing the LCD viewing screen and speakers to gain access to other parts of the camera.

Ce dont vous avez besoin

  1. Panasonic PV-GS9 LCD panel replacement, Microphone Replacement: étape 1, image 1 de 3 Panasonic PV-GS9 LCD panel replacement, Microphone Replacement: étape 1, image 2 de 3 Panasonic PV-GS9 LCD panel replacement, Microphone Replacement: étape 1, image 3 de 3

    • Locate the blue plastic tool opener, then remove both the round record/playback and record/power control knobs by prying it open from the camcorder.

    Traduire

  2. Panasonic PV-GS9 LCD panel replacement: étape 2, image 1 de 2 Panasonic PV-GS9 LCD panel replacement: étape 2, image 2 de 2

    • Open the tape compartment.

    • Then flip the camcorder and locate two 4.5mm screws that are horizontal from each other and about 2 inches apart using a #00 Phillips screwdriver.

    Traduire

  3. Panasonic PV-GS9 LCD panel replacement: étape 3, image 1 de 3 Panasonic PV-GS9 LCD panel replacement: étape 3, image 2 de 3 Panasonic PV-GS9 LCD panel replacement: étape 3, image 3 de 3

    • Use the blue plastic opening tool to remove the gray trim piece by prying it from top of the camcorder.

    • Be gentle when removing the trim piece. The plastic parts are fragile and can break easily.

    Traduire

  4. Panasonic PV-GS9 LCD panel replacement: étape 4, image 1 de 1

    • Rotate the camcorder so that the eye piece is facing you.

    • Remove the four black 4.5mm screws, sitting behind the battery.

    • Remove the 5th screw to the right of the battery dock.

    • Remove the battery by gently pulling away from the camcorder.

    • Be careful and place screws together so you don't lose any.

    Traduire

  6. Panasonic PV-GS9 LCD panel replacement: étape 5, image 1 de 2 Panasonic PV-GS9 LCD panel replacement: étape 5, image 2 de 2

    • Rotate the camcorder so that the tape compartment is facing you.

    • Remove the single 4.5mm black screw above the hook for the hand strap.

    • Undoing the strap on one end may help.

    • Rotate the camcorder so that the lens is facing you.

    • Remove the single 4.5mm black screw from the front panel.

    Traduire

  7. Panasonic PV-GS9 LCD panel replacement: étape 6, image 1 de 2 Panasonic PV-GS9 LCD panel replacement: étape 6, image 2 de 2

    • Rotate the camcorder so that the bottom is facing towards you.

    • Remove the single remaining 4.5mm black screw from the bottom.

    • Remove the four silver 4.5mm screws from the body.

    Traduire

  8. Panasonic PV-GS9 LCD panel replacement: étape 7, image 1 de 1

    • Open the LCD screen on the side of the camcorder.

    • Using a #00 screwdriver, remove the two 4.5mm silver screws located on either side of the hinge of the LCD screen.

    Traduire

  9. Panasonic PV-GS9 LCD panel replacement: étape 8, image 1 de 2 Panasonic PV-GS9 LCD panel replacement: étape 8, image 2 de 2

    • Carefully remove the front cover from the body of the camcorder.

    • This should come apart with relative ease, however a plastic opening tool may help remove the panel.

    • There is a ribbon cable attached to the front panel and the camcorder body, DO NOT pull that off when you remove this panel.

    Traduire

  10. Panasonic PV-GS9 LCD panel replacement: étape 9, image 1 de 2 Panasonic PV-GS9 LCD panel replacement: étape 9, image 2 de 2

    • Using your fingers, carefully pull the ribbon cable away from the logic board.

    Traduire

  11. Panasonic PV-GS9 LCD panel replacement, LCD Panel Removal: étape 10, image 1 de 2 Panasonic PV-GS9 LCD panel replacement, LCD Panel Removal: étape 10, image 2 de 2

    • Remove the indicated 4.5mm screws from the LCD side of the camera.

    Traduire

  12. Panasonic PV-GS9 LCD panel replacement: étape 11, image 1 de 3 Panasonic PV-GS9 LCD panel replacement: étape 11, image 2 de 3 Panasonic PV-GS9 LCD panel replacement: étape 11, image 3 de 3

    • Place a plastic opening tool under the bottom of the blue panel beneath the camcorder.

    • Using two tools may be useful, if difficult.

    • Move the plastic opening tool up the side of the camcorder as shown. Carefully separate the LCD panel from the rest of the camcorder.

    • Remove the panel from the camcorder.

    Traduire

  13. Panasonic PV-GS9 LCD panel replacement: étape 12, image 1 de 3 Panasonic PV-GS9 LCD panel replacement: étape 12, image 2 de 3 Panasonic PV-GS9 LCD panel replacement: étape 12, image 3 de 3

    • Before removing the LCD panel from the camcorder, disconnect the ribbon cables joining the LCD panel to the logic board.

    • There may be multiple ribbon cables attached to the same point on the logic board.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 9 autres contributeurs

Nate Chamness

Membre depuis le 04/15/10

24 Réputation

2 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

Cal Poly, Team 7-9, Maness Spring 2010 Membre de l'équipe Cal Poly, Team 7-9, Maness Spring 2010

CPSU-MANESS-S10S7G9

4 membres

15 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 10

Total : 3,617