Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
This guide will disassemble the device the most concise way possible to allow you to replace the Tape Player Cover.
Ce dont vous avez besoin
-
-
With a Phillips #0 screwdriver, remove the eight 9.5mm screws attached to the left and right panels of the device.
-
-
-
-
Use thumbs to push the casing forward as indicated.
-
Note the position of the tabs in these pictures. Once the casing has slid forward, it should come loose. Place it aside.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.