Introduction
The purpose of this guide is to show how to properly remove and replace the heat sink.
Ce dont vous avez besoin
-
-
Begin by turning the laptop upside down with the handle towards you.
-
Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.
-
-
-
-
Locate the heat sink on the underside of the back cover.
-
It is the U shaped metallic piece.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.