Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

Use this guide to diagnose and replace a faulty motor on your Parrot AR.Drone 2.0.

AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.

Vidéo d'introduction

  1. Remove the foam body. Remove the foam body.
    • Remove the foam body.

  2. Disconnect the battery by pulling the two red wires apart. Remove the battery by releasing the battery retaining straps.
    • Disconnect the battery by pulling the two red wires apart.

    • Remove the battery by releasing the battery retaining straps.

  3. Remove the small retaining clip using a plastic opening tool.
    • Remove the small retaining clip using a plastic opening tool.

    • Be careful as these clips can fly off and can be difficult to find.

  4. Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits

    Kits pour Nintendo Switch

    A quick fix to get back in the game

    Shop Switch Kits
  5. The propeller, gear, and rod can be removed by simply lifting them off the motor. The propeller, gear, and rod can be removed by simply lifting them off the motor. The propeller, gear, and rod can be removed by simply lifting them off the motor.
    • The propeller, gear, and rod can be removed by simply lifting them off the motor.

  6. Disconnect the connector at the bottom of the motor assembly. Disconnect the connector at the bottom of the motor assembly.
    • Disconnect the connector at the bottom of the motor assembly.

  7. Remove the three 5mm screws on the top of the motor assembly with a PH00 bit.
    • Remove the three 5mm screws on the top of the motor assembly with a PH00 bit.

  8. Remove the three 5mm screws on the bottom again using a PH00 bit.
    • Remove the three 5mm screws on the bottom again using a PH00 bit.

    • The three screws from the top are different from the three screws on the bottom.

  9. Carefully wiggle out the motor assembly out of the arm. Carefully wiggle out the motor assembly out of the arm.
    • Carefully wiggle out the motor assembly out of the arm.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

David Hoyt

Membre depuis le 09/04/2010

3 771 Réputation

43 tutoriels rédigés

Équipe

Cal Poly, Team 25-89, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 membres

52 tutoriels rédigés

are the motors different on each side?

dbksoft - Réponse

I need to know this also. replaced cross.member but did not put motors in original spots now my drone goes crazy and erratic

Steven Maloney -

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 10

30 derniers jours : 37

Total : 4,418