Aller au contenu principal

Introduction

Before replacing most other part on this device, the battery must be properly disconnected in order to continue on. This guide will teach you how to remove and replace the battery.

  1. Begin by removing the velcro strap around the battery. Begin by removing the velcro strap around the battery.
    • Begin by removing the velcro strap around the battery.

  2. While holding onto the nose, gently pull the battery away from the nose. While holding onto the nose, gently pull the battery away from the nose.
    • While holding onto the nose, gently pull the battery away from the nose.

  3. Once the battery is separated from the nose, push down on the connector and pull the battery away from the connector. Once the battery is separated from the nose, push down on the connector and pull the battery away from the connector. Once the battery is separated from the nose, push down on the connector and pull the battery away from the connector.
    • Once the battery is separated from the nose, push down on the connector and pull the battery away from the connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Nazar Savchuk

Membre depuis le 25/01/2017

264 Réputation

2 tutoriels rédigés

Équipe

UW Tacoma, Team 1-3, Rose Winter 2017 Membre de l'équipe UW Tacoma, Team 1-3, Rose Winter 2017

UWT-ROSE-W17S1G3

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 14

30 derniers jours : 58

Total : 2,407