Aller au contenu principal

Parrot FLYPAD Buttons Replacement

Ce dont vous avez besoin

  1. Parrot FLYPAD Buttons Replacement, Buttons: étape 1, image 1 de 2 Parrot FLYPAD Buttons Replacement, Buttons: étape 1, image 2 de 2
    • Position the controller so the back is facing up.

    • Use a T6 screwdriver to remove the six screws on the back of the controller: four 0.9 mm screws and two 0.1 mm screws.

  2. Parrot FLYPAD Buttons Replacement: étape 2, image 1 de 2 Parrot FLYPAD Buttons Replacement: étape 2, image 2 de 2
    • Remove the foam adhesive that connects the front plate to the motherboard

    • The buttons (L1,R1) may fall out. Set aside to replace during reassembly.

    • Use a Phillips #0 screwdriver to remove the two 0.7 mm screws.

    • Remove the motherboard from the front plate.

  3. Parrot FLYPAD Buttons Replacement: étape 3, image 1 de 3 Parrot FLYPAD Buttons Replacement: étape 3, image 2 de 3 Parrot FLYPAD Buttons Replacement: étape 3, image 3 de 3
    • Remove the buttons from the front plate of the fly pad and replace as needed.

    • Hold the front plate of the fly pad facing downwards to prevent buttons from falling out.

    • Make sure the text on buttons L1 and R1 correctly line up with L2 and R2 when reassembling the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

HUY NGUYEN

Membre depuis le 04/10/17

376 Réputation

3 tutoriels rédigés

Équipe

UW Tacoma, Team S3-G5, Liner Spring 2017 Membre de l'équipe UW Tacoma, Team S3-G5, Liner Spring 2017

UWT-LINER-S17S3G5

5 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 4

Total : 545