Aller au contenu principal

Parrot FLYPAD Joystick Replacement

Ce dont vous avez besoin

  1. Parrot FLYPAD Joystick Replacement, Joystick: étape 1, image 1 de 1
    Outil utilisé dans cette étape :
    Magnetic Project Mat
    $19.95
    J'achète
    • Total of 6 Screws are located in the back of the controller.

    • Four 0.9mm T6 screws

    • Two 0.1mm T6 screws

    • Flip the Flypad over.

    • Remove the six screws using a T6 screwdriver.

    • Use a Magnetic Mat to prevent loss of screws. Set aside.

  2. Parrot FLYPAD Joystick Replacement: étape 2, image 1 de 1
    • Flip the Flypad over again and separate the front and back. Be sure to remove the foam adhesive that connects the front plate to the motherboard.

    • Be aware that the Buttons (L1,R1) may fall out. Remember to put them back in place during reassembly.

    • Use Ph0 tool to remove the screws holding the motherboard in place.

    • Gently remove the motherboard from the front plate.

  3. Parrot FLYPAD Joystick Replacement: étape 3, image 1 de 2 Parrot FLYPAD Joystick Replacement: étape 3, image 2 de 2
    • Pop the joysticks out by pulling gently.

  4. Parrot FLYPAD Joystick Replacement: étape 4, image 1 de 1
    • Unscrew and replace joystick caps for a more comfortable grip.

Conclusion

To reassemble your device, follow these instructions in reverse order.

HUY NGUYEN

Membre depuis le 04/10/17

376 Réputation

3 tutoriels rédigés

Équipe

UW Tacoma, Team S3-G5, Liner Spring 2017 Membre de l'équipe UW Tacoma, Team S3-G5, Liner Spring 2017

UWT-LINER-S17S3G5

5 membres

3 tutoriels rédigés

2 commentaires

Do you know where I can find replacement joystick caps like the one shown in Step 4, please?

cbeilstein - Réponse

Same question as above regarding joystick caps please

Alex - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 685