Aller au contenu principal

Pentax Optio WP Motherboard and Flash Unit Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. Pentax Optio WP Motherboard and Flash Unit Replacement, Motherboard and Flash Unit: étape 1, image 1 de 1
    • Remove the 4 mm black screw on the bottom right corner of the mother board.

    • The black screw may be hard to remove. Use the tweezers if necessary.

  2. Pentax Optio WP Motherboard and Flash Unit Replacement: étape 2, image 1 de 1
    • With the tweezers, carefully peel back the copper ribbon that was underneath the black screw.

  3. Pentax Optio WP Motherboard and Flash Unit Replacement: étape 3, image 1 de 1
    • Remove the 2.5 mm silver screw from the upper left corner of the motherboard.

  4. Pentax Optio WP Motherboard and Flash Unit Replacement: étape 4, image 1 de 2 Pentax Optio WP Motherboard and Flash Unit Replacement: étape 4, image 2 de 2
    • Press down on the metal plate and gently lift the motherboard up from left to right.

    • Be cautious when lifting the motherboard since there is a copper ribbon and two wires attaching the motherboard to the flash unit.

    • Reorient the camera so you are looking at the top edge with the metal plate on the right.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Derek

Membre depuis le 01/21/11

746 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 1-13, Amido Winter 2011 Membre de l'équipe Cal Poly, Team 1-13, Amido Winter 2011

CPSU-AMIDO-W11S1G13

5 membres

18 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 236