Introduction
This is a guide on how to replace the speakers on a Philips DS3000/37 Audio Dock. Because this repair requires soldering, the soldering technique page linked here might be helpful. Comment souder et dessouder des connexions
Ce dont vous avez besoin
-
-
Pry off the front fascia by inserting a plastic opening tool between the fascia and white casing.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Un commentaire
i hardly difficult to treat 2 defective speakers. i find the flat cable a little loose on the main plate. thank you!!!