Aller au contenu principal

Introduction

Power cords can become easily broken or frayed, which can cause potential risks. This guide will teach you how to replace a damaged or broken power cord for the Philips DVP5992-F7.

Pièces

Aucune pièce spécifiée.

  1. Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver. Remove the 6.4 mm Phillips #1 screws on each side of the device. Remove the 6.4 mm Phillips #1 screws on each side of the device.
    • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

    • Remove the 6.4 mm Phillips #1 screws on each side of the device.

  2. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  3. Remove the top plate of the DVD by firmly grasping the player on both sides. Shift the top plate towards the backside of the player.
    • Remove the top plate of the DVD by firmly grasping the player on both sides.

    • Shift the top plate towards the backside of the player.

    • Lift the back half of the top plate up to remove it from the player.

  4. Locate the  power cable connector inside the DVD player. Pinch down on both sides of the cable connector. Gently pull upwards on the cable connector while wiggling it to remove it from the DVD player.
    • Locate the power cable connector inside the DVD player.

    • Pinch down on both sides of the cable connector.

    • Gently pull upwards on the cable connector while wiggling it to remove it from the DVD player.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dyllon Phuong

Membre depuis le 31/08/2018

447 Réputation

3 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 89