Introduction

Easy and budget replacement for a broken or missing bulb.

Philips Hue light bulbs are expensive ($30-70). The glass bulb is really thin and can be easily broken, resulting in an annoying aggressive light.
  • Philips Hue light bulbs are expensive ($30-70). The glass bulb is really thin and can be easily broken, resulting in an annoying aggressive light.

  • On the other hand, Ikea recently released budget & strong light bulbs ($6.99 for two). This guide will show you how to dismount an Ikea light bulb and how to use its bulb to fix a broken Philips Hue bulb with low budget.

Ajouter un commentaire

Start with carefully removing the remaining broken glass parts on the Philips lightbulb. On this example, glass parts were removed previously.
  • Start with carefully removing the remaining broken glass parts on the Philips lightbulb. On this example, glass parts were removed previously.

  • Use your Groove Joint Pliers to gently crush the screw thread contact.

  • Once removed, you'll be able to extract the LED controller using your fingers. You might have to use a pliers again.

Ajouter un commentaire

  • The bulb is sealed by the plastic & metallic body.

  • Firmly use Cutting Pliers to cut and remove the body. You will only need to break the plastic layer in order to free the bulb.

Ajouter un commentaire

  • Put glue on both the Ikea bulb and the Philips light bulb.

  • Wait a few minutes before pressing firmly against each other.

Ajouter un commentaire

  • Congratulations ! You just fixed a $60 light bulb for less than $4 !

Ajouter un commentaire

Ligne d'arrivée

Une autre personne a terminé cette réparation.

Vincent Monteil

Membre depuis le 06/07/2013

6 185 Réputation

21 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 8

7 derniers jours : 64

30 derniers jours : 248

Total : 1,573