Aller au contenu principal

Philips Norelco MultiGroom 3100 Motor Replacement

Ce dont vous avez besoin

  1. Philips Norelco MultiGroom 3100 Motor Replacement, Power Button: étape 1, image 1 de 1
    • Remove the comb from the top of the trimmer.

  2. Philips Norelco MultiGroom 3100 Motor Replacement: étape 2, image 1 de 2 Philips Norelco MultiGroom 3100 Motor Replacement: étape 2, image 2 de 2
    • Grip the attachment and twist it counterclockwise until you hear a click.

    • Pull the attachment up to remove it from the trimmer.

  3. Philips Norelco MultiGroom 3100 Motor Replacement: étape 3, image 1 de 2 Philips Norelco MultiGroom 3100 Motor Replacement: étape 3, image 2 de 2
    • Hold the trimmer upright so it is facing you.

    • Insert the plastic opening tool in the gap at the top of the power button.

  4. Philips Norelco MultiGroom 3100 Motor Replacement: étape 4, image 1 de 1
    • Apply pressure to pry off the power button.

  5. Philips Norelco MultiGroom 3100 Motor Replacement, Casing: étape 5, image 1 de 2 Philips Norelco MultiGroom 3100 Motor Replacement, Casing: étape 5, image 2 de 2
    • Insert the spudger into the bottom of the gray bezel and begin to gently pry it off.

    • Separate the bezel one clip at a time so that the clips do not break.

  6. Philips Norelco MultiGroom 3100 Motor Replacement: étape 6, image 1 de 2 Philips Norelco MultiGroom 3100 Motor Replacement: étape 6, image 2 de 2
    • Insert the spudger in the indicated hole and apply a tilting force to loosen the outer casing.

    • Pull upward on the top of the inner housing to remove it from the outer casing.

  7. Philips Norelco MultiGroom 3100 Motor Replacement, Motor: étape 7, image 1 de 2 Philips Norelco MultiGroom 3100 Motor Replacement, Motor: étape 7, image 2 de 2
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète
    • Use the tweezers to pull out the inner power button.

  8. Philips Norelco MultiGroom 3100 Motor Replacement: étape 8, image 1 de 1
    • Use the plastic opening tool to separate the clip on the right side of the inner housing.

  9. Philips Norelco MultiGroom 3100 Motor Replacement: étape 9, image 1 de 2 Philips Norelco MultiGroom 3100 Motor Replacement: étape 9, image 2 de 2
    • Push the inner housing up and to the right to separate the left clip from the battery casing.

    • Push the inner housing upwards to separate it from the battery casing.

  10. Philips Norelco MultiGroom 3100 Motor Replacement: étape 10, image 1 de 2 Philips Norelco MultiGroom 3100 Motor Replacement: étape 10, image 2 de 2
    • Use the tweezers to hold the wire steady as you unsolder the blue wire from the power switch.

    • Use the tweezers to remove the power switch.

    • For help with soldering check out the iFixit Soldering Technique Guide.

  11. Philips Norelco MultiGroom 3100 Motor Replacement: étape 11, image 1 de 3 Philips Norelco MultiGroom 3100 Motor Replacement: étape 11, image 2 de 3 Philips Norelco MultiGroom 3100 Motor Replacement: étape 11, image 3 de 3
    • Pull up on the motor to remove it from the battery casing.

    • Use the tweezers to hold the black wire steady while unsoldering it from the base of the battery.

    • Using the tweezers, pull on the black wire to remove it from the base of the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

ahaharevolution

Membre depuis le 10/04/15

759 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 1-1, Leahy Fall 2015 Membre de l'équipe USF Tampa, Team 1-1, Leahy Fall 2015

USFT-LEAHY-F15S1G1

2 membres

3 tutoriels rédigés

4 commentaires

¿Me puedes ayudar con algo?

Johan Avendaño - Réponse

Can you help me with something?

Johan Avendaño - Réponse

this guide was created also by nina lovekrist in 2015

Nina Lovekrist - Réponse

Where can I get the motor with copper shaft?

amal.hardik - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 14

30 derniers jours : 40

Total : 4,672