Réparez vos affaires Communauté Boutique

Philips Sonicare DiamondClean Circuit Board Replacement

Ce dont vous avez besoin

  1. Philips Sonicare DiamondClean Circuit Board Replacement, Circuit Board: étape 1, image 1 de 2 Philips Sonicare DiamondClean Circuit Board Replacement, Circuit Board: étape 1, image 2 de 2

    • Pull the brush head from the toothbrush.

    Modifier

  2. Philips Sonicare DiamondClean Circuit Board Replacement: étape 2, image 1 de 1

    • Use a spudger to pry the chrome cap from the base of the toothbrush.

    Modifier

  4. Philips Sonicare DiamondClean Circuit Board Replacement: étape 3, image 1 de 3 Philips Sonicare DiamondClean Circuit Board Replacement: étape 3, image 2 de 3 Philips Sonicare DiamondClean Circuit Board Replacement: étape 3, image 3 de 3

    • Invert the toothbrush and apply pressure against the metal tip until the internals and casing separate.

    • Remove the internals from the casing.

    Modifier

  5. Philips Sonicare DiamondClean Circuit Board Replacement: étape 4, image 1 de 1

    • Remove the rubber covers from the circuit board and battery.

    Modifier

  6. Philips Sonicare DiamondClean Circuit Board Replacement: étape 5, image 1 de 1

    • Carefully free the top end of the circuit board from the plastic clips holding it in place.

    Modifier

  7. Philips Sonicare DiamondClean Circuit Board Replacement: étape 6, image 1 de 1

    • Use the soldering iron to desolder the terminals marked F1, C5, R7, R6, and JP1.

    • Check out our How to Solder and Desolder Connections guide for help with soldering best practices!

    • Remove the circuit board.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 18

30 derniers jours : 75

Total : 2,671