Réparez vos affaires Communauté Boutique

Philips Sonicare DiamondClean Metal Brush Connector Replacement

Ce dont vous avez besoin

  1. Philips Sonicare DiamondClean Metal Brush Connector Replacement, Case Replacement: étape 1, image 1 de 2 Philips Sonicare DiamondClean Metal Brush Connector Replacement, Case Replacement: étape 1, image 2 de 2

    • Pull the head from toothbrush.

    Traduire

  2. Philips Sonicare DiamondClean Metal Brush Connector Replacement: étape 2, image 1 de 2 Philips Sonicare DiamondClean Metal Brush Connector Replacement: étape 2, image 2 de 2

    • Use a nylon spudger to pry the chrome cap at the bottom off.

    Traduire

  3. Philips Sonicare DiamondClean Metal Brush Connector Replacement: étape 3, image 1 de 1

    • Use a nylon spudger to release the black tabs on either side of internals.

    Traduire

  5. Philips Sonicare DiamondClean Metal Brush Connector Replacement: étape 4, image 1 de 2 Philips Sonicare DiamondClean Metal Brush Connector Replacement: étape 4, image 2 de 2

    • Put the metal head on a solid surface with handle perpendicular to the surface. Firmly, yet gently, push down until the internals start to slide out.

    Traduire

  6. Philips Sonicare DiamondClean Metal Brush Connector Replacement, Metal Brush Connector Replacement: étape 5, image 1 de 1

    • Use a Phillips screwdriver to remove the screw at the base of the metal head.

    Traduire

  7. Philips Sonicare DiamondClean Metal Brush Connector Replacement: étape 6, image 1 de 1

    • Use fine tip tweezers to push the white plastic tabs in to release the head from the innards.

    Traduire

  8. Philips Sonicare DiamondClean Metal Brush Connector Replacement: étape 7, image 1 de 1

    • Gently pull the metal head from the innards.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

9 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Zachary Bertrand

Membre depuis le 11/20/17

813 Réputation

3 tutoriels rédigés

Badges: 14

+ 11 badges supplémentaires

Équipe

IUPUI, Team S22-G1, Bayer Fall 2017 Membre de l'équipe IUPUI, Team S22-G1, Bayer Fall 2017

IUPUI-BAYER-F17S22G1

4 membres

9 tutoriels rédigés

7 commentaires

Great guide - but where is a good source for replacement parts?

Christian Zischek - Réponse

Ordered replacement part, came within 3 days at ebay. Didn’t have to replace the soft rubber inlet parts, only the connector.

Piece of cake, exchange of battery seems more labourous, but the brush still works for two weeks, so we postpone this job.

Emilio - Réponse

Gut beschrieben, aber wo bekomme ich eine neue Antriebsachse?

Beste Grüße - pechi606

Walter P - Réponse

Z.B. direkt aus China : ebay

VauWeh -

Great post, thank-you. One question: My toothbrush has a wire loop around the head. The loop is soldered to the circuit board. Do you know what that wire is for? Cheers!

tim belina - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 8

7 derniers jours : 71

30 derniers jours : 329

Total : 16,343