Réparez vos affaires Communauté Boutique

Philips Sonicare DiamondClean Spring Replacement

Ce dont vous avez besoin

  1. Philips Sonicare DiamondClean Spring Replacement, Spring: étape 1, image 1 de 1

    • Pull the toothbrush head off the toothbrush.

    Modifier

  2. Philips Sonicare DiamondClean Spring Replacement: étape 2, image 1 de 1

    • Use a spudger to pry the chrome cap from the base of the toothbrush.

    Modifier

  4. Philips Sonicare DiamondClean Spring Replacement: étape 3, image 1 de 3 Philips Sonicare DiamondClean Spring Replacement: étape 3, image 2 de 3 Philips Sonicare DiamondClean Spring Replacement: étape 3, image 3 de 3

    • Invert the toothbrush and apply pressure against the metal tip until the internals and casing separate.

    • Remove the internals from the casing.

    Modifier

  5. Philips Sonicare DiamondClean Spring Replacement: étape 4, image 1 de 1

    • Remove the rubbers covers from the circuit board and battery.

    Modifier

  6. Philips Sonicare DiamondClean Spring Replacement: étape 5, image 1 de 2 Philips Sonicare DiamondClean Spring Replacement: étape 5, image 2 de 2

    • Separate the upper and lower components by sliding the circuit board section and motor section away from each other.

    • Remove the spring.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 5

7 derniers jours : 30

30 derniers jours : 106

Total : 3,275